Hot search:

Radio Circuit Category

·Maybe you want to read these
Hot Radio Circuit

@WiringCircuit

>> Home > Radio Circuit > Crystal Controlled Oscillator Circuit

Crystal Controlled Oscillator Circuit

2012-12-22 Posted by:circuit Source:Internet Visits: Comment () Size:L M S

Summary:Crystal Controlled Oscillator Circuit This general purpose signal source serves very well in signal-tracing applications. The output level is variable to more than 1 V rms into a 50Ω load. Almost any crystal in the 1 to 15 MHz range can be

Crystal Controlled Oscillator Circuits


Crystal Controlled Oscillator Circuit

This general purpose signal source serves very well in signal-tracing applications. The output level is variable to more than 1 Vrms into a 50Ω load. Almost any crystal in the 1 to 15 MHz range can be used.

Crystal Controlled Oscillator Circuit diagram

PARTS LIST R1 10kΩ R2 10kΩ R3 10kΩ R4 10kΩ R5 2.2kΩ R6 470Ω R7 33Ω R8 500Ω Preset C1 0.001µF (102) C2 100pF C3 0.001µF (102) C4 0.01µF (103) C5 0.01µF (103) C6 0.01µF (103) Q1 2N2222 Q2 2N2222 XTAL1 CRYSTAL (1 to 15 MHz)

Q1 forms a Colpitts oscillator with the output taken from the emitter.

2N2222 NPN switching transistor pin configuration

2N2222 Pin Configuration

A capacitive voltage divider (across the 2.2k Ω emitter resistor) reduces the voltage applied to the buffer amplifiers Q2. The buffer and emitter follower, provides the low input impedance necessary to drive 50Ω loads.

Crystal Controlled Colpitts Oscillator Circuit Crystal Signal Source Frequency Measuring Crystal Controlled Oscillator Circuits


Good
(0)
0%
Bad
(0)
0%
-------------------------------------
Circuit Notice

If the circuit&wiring in《Crystal Controlled Oscillator Circuit》was too small to read, you should download them!

@Wiring Circuit@

@New comment
      What's the feeling for you?
      Face:
      Comment:
      Change the code
      * Ctrl+ENTER To Sent

      @READ EXPLANATION

      ☉If you have any questions, please don't mind to tell us.