Hot search:

Hot Audio

@WiringCircuit

>> Home > Audio > Noise reduction circuit

Noise reduction circuit

2013-02-07 Posted by:circuit Source:Internet Visits: Comment () Size:L M S

Summary:The noise reduction circuit is based on the observation that noise is always disturbing in intervals when music stops. It will attenuate the signal output by about 45 dB, when the musical signal input is null or very weak. If the musical si

The noise reduction circuit is based on the observation that noise is always disturbing in intervals when music stops. It will attenuate the signal output by about 45 dB, when the musical signal input is null or very weak.

If the musical signal begins to increase, the attenuation will decrease proportionally reaching the value of 0 dB during normal or strong passages.

Noise reduction circuit sensitivity can be regulated with potentiometer P1: if it is higher, the more rapidly decreases the noise suppression. In this way, the sensitivity of the circuit can be adapted to different sources of music.

The maximum audio signal which circuit can work is 210 mV. Distortion is less than 0.01%. Time delay of the noise reduction circuit is determined by the time constant R7C4. For the schematic values, it is 1 second, but obviously can be changed at will. The electronic circuit can be supplied with a voltage between 12V and 30 V, and current consumption will be 2 to 3mA. Here are some 12Vdc power supply circuits.

Stereo Noise reduction circuit diagram

stereo noise reduction circuit

741 datasheet
Good
(0)
0%
Bad
(0)
0%
Tags:741
-------------------------------------
Circuit Notice

If the circuit&wiring in《Noise reduction circuit》was too small to read, you should download them!

@Wiring Circuit@

@New comment
      What's the feeling for you?
      Face:
      Comment:
      Change the code
      * Ctrl+ENTER To Sent

      @READ EXPLANATION

      ☉If you have any questions, please don't mind to tell us.