Hot search:

Hot Audio

@WiringCircuit

>> Home > Audio > Low noise microphone preamplifier circuit

Low noise microphone preamplifier circuit

2013-03-07 Posted by:circuit Source:Internet Visits: Comment () Size:L M S

Summary:The microphone preamplifier circuit design presented in this schematic use SSM2015 produced by Precision Monolithics Inc. (PMI) which offers a high amplification and low noise ( 1.3nV/√f). Has been designed to work with differential input

The microphone preamplifier circuit design presented in this schematic use SSM2015 produced by Precision Monolithics Inc. (PMI) which offers a high amplification and low noise ( 1.3nV/√f).
Has been designed to work with differential input signals and can deliver 10 to 2000x amplification and it is term of R4 value. For R5 = R6 the amplification is A = (20000/R4)+3.5

The values from the schematic correspond to 1000x amplification. Noise signal ratio is 95dB.
Distorsions were 0.006% at 1kHz and 0dBV and lower than 0.01% at 10kHz. Bandwidth is 180kHz at 3V and 1kΩ impendance.

Mic preamp circuit diagram

microphone preamplifier circuit diagram

Microphone preamplifier pcb

microphone preamplifier pcb
R3 value depends on selected amplification ( tabel 2 ):
microphone-preamplifier-tabel

Good
(0)
0%
Bad
(0)
0%
-------------------------------------
Circuit Notice

If the circuit&wiring in《Low noise microphone preamplifier circuit》was too small to read, you should download them!

@Wiring Circuit@

@New comment
      What's the feeling for you?
      Face:
      Comment:
      Change the code
      * Ctrl+ENTER To Sent

      @READ EXPLANATION

      ☉If you have any questions, please don't mind to tell us.