Hot search:

Hot Audio

@WiringCircuit

>> Home > Audio > A Low Cost Hearing Aid

A Low Cost Hearing Aid

2013-04-24 Posted by:circuit Source:Internet Visits: Comment () Size:L M S

Summary:A Low Cost Hearing Aid Circuit Description This low-cost, general-purpose electronic hearing aid works off 3V DC (2x1.5V battery). The circuit can be easily assembled on a veroboard. For easy assembling and maintenance, use an 8-pin DIP IC

A Low Cost Hearing Aid

Circuit Description

This low-cost, general-purpose electronic hearing aid works off 3V DC (2x1.5V battery). The circuit can be easily assembled on a veroboard. For easy assembling and maintenance, use an 8-pin DIP IC socket for TDA2822M.

Circuit Diagram:

Circuit Diagram

Parts:

  • P1 = 10K
  • R1 = 2.2K
  • R2 = 330K
  • R3 = 680R
  • R4 = 33R
  • R5 = 100R
  • R6 = 4.7R
  • R7 = 4.7R
  • R8 = 220R
  • C1 = 0.01uF-10V
  • C2 = 100nF-63V
  • C3 = 47uF-10V
  • C4 = 10uF-10V
  • C5 = 0.01uF-10V
  • C6 = 100uF-10V
  • C7 = 100nF-63V
  • C8 = 100nF-63V
  • D1 = Red LED
  • Q1 = BC547
  • IC1 = TDA2822M
  • EP1 = Mono Earphone 32R
  • SW1 = On-Off Switch

Circuit Operation:

In this circuit, transistor Q1 and associated components form the audio signal preamplifier for the acoustic signals picked up by the condenser microphone and converted into corresponding electrical signals. Resistor R5 and capacitor C3 decouple the power supply of the preamplifier stage. Resistor R1 biases the internal circuit of the low-voltage condenser microphone for proper working. The audio output from the preamplifier stage is fed to the input of the medium-power amplifier circuit via capacitor C2 and volume control P1.

The medium-power amplifier section is wired around popular audio amplifier IC TDA2822M (not TDA2822). This IC, specially designed for portable low-power applications, is readily available in 8-pin mini DIP package. Here the IC is wired in bridge configuration to drive the 32-ohm general-purpose monophonic earphone. Red LED (D1) indicates the power status. Resistor R8 limits the operating current of D1. The audio output of this circuit is 10 to 15mW and the quiescent current drain is below 1 mA.

Good
(0)
0%
Bad
(0)
0%
Tags:audio
-------------------------------------
Circuit Notice

If the circuit&wiring in《A Low Cost Hearing Aid》was too small to read, you should download them!

@Wiring Circuit@

@New comment
      What's the feeling for you?
      Face:
      Comment:
      Change the code
      * Ctrl+ENTER To Sent

      @READ EXPLANATION

      ☉If you have any questions, please don't mind to tell us.